User manual

14
USING YOUR MACHINE
WASHING 2.25 KG OF SYNTHETICS AT 40°C
Suppose you have 2.25 kg of synthetic fabric laundry to
wash. They are rather delicate fabrics and should not be
washed at a high temperature.
1 Load the laundry
Open the door by pulling the
catch outward.
Load the items one at a time
and close the door.
2 Measure out the detergent
Pull out the detergent
dispenser drawer from the
control panel. Measure out
the amount of detergent
required and pour into the
main wash
compartment .
3 Add the fabric softener if required
Pour the fabric softener, if
required, into the
compartment marked .
Do not exceed the MAX.
level and then close the
drawer gently.
4 Select the required wash programme
Turn the programme selector
dial clockwise to the
required programme.
5 Start the machine
Before starting up the machine, check that:
• the appliance is plugged in
• the water supply taps are turned on
• the drain hose is correctly and securely positioned
• the door and the detergent dispenser drawer are closed.
Pull the programme selector dial outwards.
The operating pilot light will illuminate and the machine will
start operating.
6 At the end of the programme
After the last rinse, the machine will stop with water left in
the drum. This prevents the clothes from creasing if they
are left in the machine at the end of the wash cycle. Turn
the selector dial to DRAIN (12) or SPIN (6) to drain the
water. The door is controlled by a safety device which
releases 2 minutes after the end of the programme.
Before attempting to open the door you must ensure
there is no water in the drum.
Switch the machine off by depressing the programme
selector dial.
When the programme has finished, you are advised to
unplug the appliance and turn off the water taps.
WARNING: To prevent any water spillage, you must
select a draining programme, and ensure there is no
water in the drum, before opening the door.
P0004
90
P0345
8