The BENDIX auto washer 800 Model 71468 Operating & installation Instructions You are now the proud owner of a Bendix Auto washer and you will be pleased to find that it washes, rinses and spins without you having to handle the clothes in between times. You will obviously want to obtain the best possible wash from your machine, By reading and following the instructions in this booklet you will achieve excellent results.
DISFIGUREMENTS A firm, label, and & relatively smooth floor, with the services brought to the appliance, A minimum clearance is required each side ot the appliance to permit removal for servicing. UNPACKING &INSTALLATION 1. Remove the 4 hexagon head shipping screws marked ‘A’ 2. Remove the 8 thread cutting screws marked HOT WATER 3. Lower the back panel and remove the 4 metal spacers marked 'C’ do nat remove the 4 rubber grommets from the back panel. 4.
ELECTRICITY Mainslead:3core 2.7m 9t Fused and earthed supply: 240V Shiraz a.c. Fuse ratings: 13A0r 154 WARNING THIS APPLIANCE MUST BE EARTHED if this appliance is fitted with & non-rewire able plug for which your socket is unsuitable then R should be cut off and an appropriate plug fitted, The removed pig should be disposed of as insertion of the plug into a 13 A socket is finely 10 cause an electrical hazard. If it is necessary to change the fuse in & non-rewire able plug the fuse cover must be refitted.
CONNECTING THE INLET WATER SUPPLY Connect the inlet hoses, making sure the sealing washers sre supplied are fitted 1o each end of both hot and cold water hoses.
Most important: Make sure alf hoses are free from kinks or the machine wilt not operate. instantaneous Water Heaters This model is suitable for use with some makes of instantaneous gas water-heaters. Full details of compatible water-heaters should be obtained from the heater manufacturer or Gas showroom. “The use of these heaters may require more frequent cleaning of the Dishwasher water inlet filters than ‘would be necessary with either water heating methods.
Operating Instructions Know your BENDIX dishwasher WASH THREE ELECTOR IMPORTANT: Tum only clockwise. Notate clockwise to select the wash programmer required. Pull it out to start the machine, push in to stop it Once sst and pulled out the Wash Timer Deprogramming Selector rotates and shows how far through the wash programmer your making has progressed.
Using your BENDIX auto washer Always use a low sussing detergent in your machine, e.g. Perils Automatic, as these are specially formulated fo work in conjunction with your Auto washer machine o give the best consults. Initially water enters the machine and flows directly to the drum bypassing the detergent dispensary, preventing waste of detergent into the sump. Detergents wil then be flushed automatically into the machine from the detergent dispenser.
Loading the Machine When you have a Sarge wash Road made up of shirts, towels, pillowcases, pajamas and other similar small toms, pace them loosely Into the drum. Large items fiche a candlewick bedspread for instance, should he washed individually. When washing a mixed load, put medium and small items info the drum alternately. A sheet should te picked up by the center, tent wise, shaken and then folded, pressing out the air. Wash Programmer The.
Quick Wash Programmer (7] provides the facility for a quick 40 minute wash. Select the programmer as above suppression the wool button Blankets Blankets that are verified ‘Machine Washable' can be stately washed on the Coal Programmer \7] (40°Cy. Do not serest an “economy programmer. Most blanket manufacturers issue specific treatment for their products. Sometimes they wit stipulate hand washing or dry cleaning.
