Instructions / Assembly

FOLDING FISH STATION ASSEMBLY & SET - UP INSTRUCTIONS

Step by step instructions:

Step 1: Remove Station from the box and position it on the ground as illustrated below.

Open up each leg set and lock into place.

(MAKE SURE LEGS ARE COMPLETELY LOCKED IN POSITION BEFORE USING!)

Tricam

7677 Equitable Drive

Eden Prairie, MN 55344

1-800-867-6763

www.tricam.com

PAGE 1
FOLDING FISH STATION ASSEMBLY & SET - UP INSTRUCTIONS Step by step instructions: Step 1: Remove Station from the box and position it on the ground as illustrated below. Open up each leg set and lock into place. (MAKE SURE LEGS ARE COMPLETELY LOCKED IN POSITION BEFORE USING!) Tricam 7677 Equitable Drive Eden Prairie, MN 55344 1-800-867-6763 www.tricam.
PAGE 2
Step 2: Faucet and Drain Assembly. a. Faucet Connection: 1) It’s recommended to connect the water hose on the quick connector with rubber washer on first. 2) Pull out the quick connector from the back side of table. 3) Insert faucet with retaining nut, c-clip and O-Rings pre-installed into quick connector and tighten. b. Drain Connection: The metal drain, screw and rubber washer are placed on the station's top side. c. Drain Connection: The rest or the components are placed under the stations top side.
PAGE 3
WARNINGS: DO NOT DRINK WATER FROM FAUCET DO NOT SIT OR STAND ON TABLE DO NOT EXCEED THE OVERALL LOAD CAPACITY OF 150 LBS.