Warranty

10 11
If you ever need to replace any part (pages 12–13), we recommend to use only
Tribest Professional production spare parts. Please contact our customer
service center at [phone].
EN
7. TROUBLESHOOTING
Problem Possible Reason Solution
The ARM (15) does not
turn around or is difcult
to turn around.
The GEAR RACK (16) has
been deformed.
Call customer service.
PINION GEAR (09) has
been deformed.
Oxidation may have
occurred.
Poor performance when
pressing the juice or poor
juice amount.
The selected fruits
may not be suitable for
juicing.
Try different types of
produce, look for “juicing”
varieties.
The STRAINER (18) is not
properly positioned on
the BOWL (19).
Make sure the STRAINER
(18) is properly
positioned on the BOWL
(19) by ensuring there is
no space visible.
The operation of the
ARM (15) was not fully
complete.
Try turning the ARM (15)
all the way.
After the pressing, juice is
dripping from the BOWL
(19).
Juice dripping is normal.
Position the DRIP CUP
(25) right under the BOWL
(19) after juice pressing
to keep your area clean.
Despite placing the
product on a flat surface,
the product is wobbling.
One of the RUBBER FEET
(28) may have come out.
Call customer service.
After pressing, the ARM
(15) is unable to spring
back.
The TOP PLASTIC
SPRING (03) may have
deformed.
Call customer service.
The top PLASTIC BOLT
(02) may have loosened.
CUSTOMER SUPPORT
In the event that you have any questions concerning the use, care, or service
for this product, please feel free to call us or send us an email. If you purchased
your product outside of the United States, please refer to your warranty card for
your nearest service center.
The complete list of parts is on pages 12–13.
United States
Tribest Professional
1143 N. Patt St.
Anaheim, CA 92801
Toll-Free: 1-888-254-7336
[e-mail]
tribestpro.com
International
Tribest Professional
1143 N. Patt St.
Anaheim, CA 92801
Telephone: [phone]
[e-mail]
6. MAINTENANCE