Installation instructions
9 10 8 9 6 7 5 10 3 2 4 1 2 3 1 x1 A B M8x50 8x40mm x4 G C x10 x12 x12 H D J x2 E M6x40 x8 K 8x20mm x4 x1 x1 F x4 L x6 M 6x25mm x2 x1 x2
01 M 3 J M J 2 J M J 3 2 M J 3 J x2 B B 2 4 2 8x40mm B 3 x4 J C 8x20mm x4 x4 02 1 1 A 8x50mm x4
03 C B 8x40mm x8 x8 04 7 6 L K 7 K 5 F K H 6x25mm x2 x2 x1
05 8 F H x1 x2 06 8 5 Don't tighten the screws of Part 5 and Part 8 and the bottom connecting rods at first, please wait until Part 9 and Part 10 are connected to the desktop then tighten them.If Part 7 is not flat, you need to loosen the screws connecting Part 4 to fine-tune the upper and lower distances to keep the desktop flat.
07 10 9 9 10 F G x6 x2 08 G G E G x4 x4
