Operation Manual

5. System Information

9. Advanced Operation

In this section some operations are described that do not necessarily belong to the basic functions

of this unit and they need not to be carried out for normal TV viewing. However, from time to time it

may become necessary to use one of these functions.

9.1 Auto Search Function

When you set up your receiver for the first time, an "Auto

Search" process will start automatically. If it should fail for

some reasons or you wish to search for new TV channels,

please follow the steps listed below.

Select "Manual Search" in the "Channel Manager" menu and then press the OK button.

Select the multiplexes (TV channel packages) you want to search, using the buttons and

OK.

After the settings are completed, press the RED button to start "Manual Search".

The names of the found channels will be listed.

After the search process has been finished, the unit automatically turns to normal TV viewing

mode.

9.2 Manual Search Function

Use this channel search by entering the multiplex

information manually to the receiver. This channel search is

often used to search for a particular channel or those

channels that "Auto Search" has missed, but it requires

comparatively more expertise.

Select "Auto Search" in the "Channel Manager" menu and then press the OK button.

TV (and radio broadcast channels, if available) will be searched.

The names of the found channels will be listed.

After the search process has been finished, the unit automatically turns to normal TV viewing

mode.