Operation Manual

GB
6.3 Program Information (EPG)
Please note that not all broadcasters provide program
information. So, depending on the broadcaster, program
information may not always be available.
You can use the EPG and INFO buttons to view the
extended program information.
Use the EPG button to view the information on program
titles, broadcast schedule, program synopsis, etc., which
are provided by the broadcaster of the current channel.
Select the program you want to learn more about.
Use the buttons on the remote control to navigate through different programs and use the
- buttons to navigate through the days of the week.
Press the OK button. A synopsis of the selected program appears.
Use the INFO button to obtain information about the current program.
While watching TV or listening to the radio, press the
INFO button.
When the button is pressed once, the channel information
will be displayed in the Info Box.
Press the INFO button again to display additional
information, such as a synopsis of the current
program,theme, etc.
To display information about the next scheduled program,
press the button.
To return to viewing mode, press the INFO button again or
press the EXIT button.
6.4 Subtitles
This receiver is capable of displaying DVB subtitles that come with selected TV channels. Please
note that subtitles may not be available depending on the TV provider.
To display subtitle text, press the SUBT button on the remote control.
Press the SUBT button again to switch off subtitles.
6.5 Teletext
With this receiver, teletext can be viewed in two different ways.
The so-called "OSD Text" is utilizing the built-in teletext decoder of this receiver. It can be
operated with the remote control unit of this receiver. Usually, it is much faster than the
conventional teletext. It can be used also with TV monitors or projectors that don't have an
integrated teletext decoder.
An other option is called "VBI Text" that leaves decoding up to a teletext decoder that is built into
the TV set. In this case, all teletext functions must be operated through the remote control unit of
the TV set.
To enter "OSD Text" press the TTX button on the remote control unit of this receiver.
To select the teletext pages use the numeric or buttons. The purpose of the color buttons on
the remote control unit is explained in the bottom line of the teletext window.
To switch off teletext, press the EXIT button .