Operation Manual

9.6 Auto Search Function

Auto Search is the one used most frequently used methods of channel search. It is intended to

have the receiver automatically search all the channels from the satellite you selected.

Select "Auto Search" and then press the OK button.

Select the satellite using the OK button.

Set the LNB information and DiSEqC information for the

satellite. You can use the existing setting. To change the

setting, use the buttons.

Set DiSEqC port to OFF (or to a port you want to use, if any)

Select the type of channels to search: FTA, Scrambled, ALL

or Network.

Start searching for TV and radio channels using the above

settings. Press the OK button.

TV and radio broadcast channels will be searched.

The names of the channels will be listed.

Press the EXIT button to return to viewing mode and check

whether the reception of the selected channel is good.

9.7 Manual Search Function

Use this channel search by entering the TP information manually to the receiver. This channel

search is often used to search for a particular channel or those channels that "Auto Search" has

missed, but it requires comparatively more expertise.

Select "Manual Search" and then press the OK button.

Select the satellite you want to track.

Set the LNB information and DiSEqC information for the

satellite. You can use the existing setting. To change the

setting, use the buttons.

Set the LNB polarization of the TP to "Horizontal" or

"Vertical".

After the settings are completed, select "Next" and then

press the OK button.

Set the Down Frequency of the TP.

Set the Symbol Rate of the TP.

Press the OK button to start searching using the above settings.

Another search method is "Advanced Search". Use this channel search to search for a

particular channel or channels ones that you couldn't find using "Manual Search". Enter the

PID of the channel you want to search.

Set the channel's Video PID.

Set the channel's Audio PID.

Set the channel's PCR PID.

Press the OK button at "Start Search"

The names of the channels will be listed.

Press the EXIT button to return to viewing mode and check that the reception of the selected

channel is good.