Owner's Manual

26
EN
Connection via an optical cable
The optical input enables you to connect your ELARA speakers to any audio device with an optical
output: audio player, DVD player, television, etc. To do so:
Î Plug one end of the optical cable into the back of the active speaker in the “OPTICAL” input
and the opposite end into your device.
Î Select the “OPTICAL” input using the remote or the “INPUT” button (volume button) on the
back of the active speaker. (The source selection order is indicated above the “INPUT” button.)
The green LED indicates that the source is actually connected to the “OPTICAL” input. Your
system is ready to operate.
Connection via a coaxial cable
The coaxial input enables you to connect your ELARA speakers to any audio device with a coaxial
output: CD player, DVD/Blu-ray player, television, etc. To do so:
Î Plug one end of the coaxial cable into the back of the active speaker in the “COAXIAL” input
and the opposite end into your device.
Î Select the “COAXIAL” input using the remote or the “INPUT” button (volume button) on the
back of the active speaker. (The source selection order is indicated above the “INPUT” button.)
The green LED indicates that the source is actually connected to the “COAXIAL” input. Your
system is ready to operate.
Connection of a subwoofer
The ELARA speakers include a subwoofer output allowing the connection of a subwoofer.
A RCA to 2 RCA cable (Y cable) must connect the SUB output of the ELARA speakers to the 2 LINE
IN of the subwoofer. Set the subwoofer volume and cut-off frequency (Crossover) so that you get
a proper sound coherence between the ELARA speakers and the subwoofer. Subwoofer sound
needs to be heard without being too powerful.
POWER
HIGH LEVEL OUTPUT
ACTIVE SUBWOOFER
HIGH LEVEL INPUT
INPUT
LFE
LINE IN VOLUME CROSSOVER
30Hz 120Hz 180 OFF
0 ON
PHASE AUTO
LEFT RIGHT LEFT RIGHT
ON
OFF
TRIANGLE DISTRIBUTION FRANCE
1940 Avenue Flandres Dunkerque 1940,
02200 Villeneuve-Saint-Germain FRANCE
ASSEMBLED IN CHINA