Manual

Superior Design “ Tank-in-Tank” Technology
A. Inner stainless steel tank
B. Outer steel tank
C
. 2” Polyurethane insulation
D. Boiler water connection
E. Boiler water connection
F. Hot water outlet
G. Cold water inlet
H. Auxiliary connection
I. Thermostat control
J. Plastic jacket
K. Thermostat remote sensing bulb
L. Air vent connection
M. Electrical wiring plug
E
F
M
L
I
G
K
D
A
B
C
J
H
SMART Series
Smart Series is tested in accordance with the standard (ANSI/UL-174) (CAN/CSA-C22.2 NO. 110-M90) and is certified by ETL.
Construction Specifications
The domestic storage tank is
constructed of stainless steel and is
surrounded by boiler water in the outer
tank, resulting in a full "wrap around"
heat exchanger.
It's superior heat exchange surface
(typically 1.5 to 2.5 times larger than a
traditional coil) produces a larger
volume of hot water in a short period of
time. Thanks to this fast recovery, the
storage capacity can be reduced,
resulting in a reduced thermal loss.
The inner, domestic tank is suspended
within the outer tank so it is free to
expand and contract as the pressure
varies during hot water draws.
Moreover, its corrugations amplify the
movement and prevents the lime build
up on the heat exchanger; thus
maintaining its performance during the
SMART Series life span.
The "Tank-in-Tank" design allows us to
store domestic water at higher tempe-
ratures preventing bacteria growth.
Additionally, contructed of high quality
stainless steel, SMART Series does not
require a protective anode.
The inner domestic storage tank is
constructed of durable, corrosion
resistant stainless steel.
SMART Series, is insulated with 2" of
injected polyurethane foam, resulting in
a stand by heat loss of less than 1º/Hr.
Superior Heat Exchange Surface Area
Stainless Steel Tank Construction
Optimal Insulation
Anti-Bacteria Growth / Maintenance Free
Self Cleaning / Self - descaling