Install Instructions

ManualsBrandsTriangle Tube ManualsBoiler PartsTriMax Display Module (for Solo 60-399, PTE110 Boilers)

PRESTIGE TriMax Control

and/or Display Module Replacement

Kit Part Number:

- PTRKIT205 - TriMax Control Module

(PT 60/110, 175, PTE 110)

- PTRKIT206

- TriMax Control Module

(PT250/399)

PTRKIT207 - TriMax Display Module

Parts List (Fig.1)

1 - Control Module (PTRKIT205) - Item 1

2 - Display Module (PTRKIT207) - Item 2

Recommended Tools:

- Phillips Screwdriver

Indicates a potentially hazardous situation

which, if ignored, can result in serious

injury or substantial property damage.

For your safety, turn off electrical power

supply at service panel before proceeding to

avoid possible electrical shock hazard.

Failure to do so can cause severe personal

injury or death.

For your safety, the boiler may be extremely

hot. Ensure the boiler has properly cooled

prior to servicing. Failure to do so can cause

severe personal injury.

Indicates special instructions on installa-

tion, operation or maintenance, which are

important to equipment but not related to

personal injury hazards.

Failure to follow instructions below can

result in severe personal injury or damage if

ignored.

• Instructions are for a qualified installer/

service technician.

• Read all instructions before proceeding.

• Follow instructions in proper order.

These part kits PTRKIT205, PTRKIT206

and PTRKIT207 can only be used on

Prestige Boilers with serial numbers begin-

ning with PT.

WARNING

NOTICE

WARNING

NOTICE

WARNING

Fig. 1: PRESTIGE Solo Control

Prestige_TriMax_Control_Display_Module_DCR639 1/14/14 9:45 AM Page 1

Summary of content (6 pages)

PAGE 1
Prestige_TriMax_Control_Display_Module_DCR639 1/14/14 9:45 AM Page 1 PRESTIGE TriMax Control and/or Display Module Replacement Kit Part Number: - PTRKIT205 - TriMax Control Module - - (PT 60/110, 175, PTE 110) PTRKIT206 - TriMax Control Module (PT250/399) PTRKIT207 - TriMax Display Module Parts List (Fig.1) 1 - Control Module (PTRKIT205) - Item 1 2 - Display Module (PTRKIT207) - Item 2 2 Recommended Tools: - 1 Phillips Screwdriver Fig.
PAGE 2
Prestige_TriMax_Control_Display_Module_DCR639 1/14/14 9:45 AM Page 2 PRESTIGE TriMax Control and/or Display Module Replacement 3. Press the OK button while the CH & DHW Settings icon is highlighted. Removal of the Prestige TriMax Control Module and Display Module NOTICE Prior to replacing the control module and/or display module, it is important to access and document the boiler’s settings. This will ensure any settings revised from factory defaults are transferred to the new module(s).
PAGE 3
Prestige_TriMax_Control_Display_Module_DCR639 1/14/14 9:45 AM Page 3 PRESTIGE TriMax Control and/or Display Module Replacement 11. Press the RIGHT then DOWN buttons to highlight the Previous Screen icon , then press the OK button. 7. Press the RIGHT button to highlight the DHW Settings icon then press the OK button. 12. Press the RIGHT then DOWN buttons to highlight the Cascade icon , then press the OK button. DHW Settings 13.
PAGE 4
Prestige_TriMax_Control_Display_Module_DCR639 1/14/14 9:45 AM Page 4 PRESTIGE TriMax Control and/or Display Module Replacement Mounting screw location Retaining Tabs Fig. 6. Control Module Mounting Fig. 4: Control Box Assembly Mounting screw location NOTICE Go to step 15 if one only wants to remove the Trimax Control Module. Proceed to step 8 if the Trimax Display Module must also be removed. 6. Remove all (8) Molex wiring connectors from the Control Module.
PAGE 5
Prestige_TriMax_Control_Display_Module_DCR639 1/14/14 9:45 AM Page 5 PRESTIGE TriMax Control and/or Display Module Replacement 20. Tilt control panel assembly upward and lock sliding tabs in place. 21. Remount the front jacket panel to the boiler. 6 22. Turn power to the unit “ON” and return the boiler to service. 5 4 1 23. Return to page 2 and enter settings recorded in Table 1 back into the Trimax control. 2 NOTICE 3 Fig. 7.
PAGE 6
Prestige_TriMax_Control_Display_Module_DCR639 1/14/14 9:45 AM Page 6 Table 1: TriMax Settings HEATING SETTING Heating Operation Demand Absolute Max CH Setpoint CH1 Maximum Setpoint CH1 Minimum Setpoint Reset Curve Coldest Day Reset Curve Warmest Day CH2 Circuit CH2 Maximum Setpoint CH2 Minimum Setpoint Warm Weather Shutdown Pump Constant Circulation CH Post Pump Time Freeze Protection Frost Protection Setpoint Parallel Shift Value CH Call Blocking System Pump PRESTIGE TriMax Control and/or Display