Instructions

11. Test the inhibitor levels present using the Fernox 60 Second Protector Check Strip and color code chart.
Dip the strip for 5 seconds into a sample of system water. Remove excess water and wait for one
minute, then compare the color of the strip to the chart provided.
12. Check the system pH level using a provided pH test strip and color coded chart. The pH value of the
system water must be between 7 and 8.5.
13. If the Fernox 60 Second Protector Check Strip and/or the pH test strip do not show positive results, add
additional Fernox Protector F1. Repeat both tests with fresh test strips until achieving the desired
results.
Packaging, Handling and Storage
The Fernox Boiler Commissioning Kit is supplied as with full instructions and is non-hazardous reagents. Keep
out of reach of children.
Contents:
1 x Fernox Protector F1 17.6oz (500ml)
1 x Fernox Cleaner F3 17.6oz (500ml)
4 x Fernox pH Test Strips
2 x Fernox 60 Sec Protector Check Strips
Instruction Leaflet
Product code: 59480