Install Instructions

3
PRESTIGE Wall Mounting
Bracket Kit Instructions
2009-34 Prestige Bracket Kit Inst
Revision 8/19/09
4. Remove the bracket from the wall and drill a
5/8” diameter hole by 1-3/8” deep, positioned in
the center of each mark.
5. Install the anchors provided in the kit flush or
slightly recessed into the drilled holes with
threaded side inward.
6. Reposition the bracket on the wall and align
mounting slots/holes. Insert the two bolts pro-
vided in the kit through the mounting
slots/holes and loosely tighten.
7. Level bracket and tighten bolts securely.
Boiler Mounting
1. Obtain assistance in lifting the boiler onto the
wall bracket.
2. Install the boiler making sure the boiler mounting
lip located along the upper edge of the rear jacket
panel engages the wall-mounting bracket. Ensure
the boiler is seated properly and is secure.