Install Instructions

PRESTIGE Wall Mounting
Bracket Kit Instructions
2
Wall Mounting Guideline
1. The wall mounting bracket is designed for stud
spacing of 12 inch or 16 inch on centers. For
unconventional stud spacing, a solid/secure
mounting surface must be provided for installa-
tion of the bracket.
2. For applications using wood studs, install the
bracket using the lag screws provided with the
boiler. Ensure both lag screws are installed
securely in the studs.
3. For applications using metal studs, install the
bracket to the studs using 3/16” toggle bolts and
washers.
4. DO NOT mount or attempt to mount the wall
bracket to hollow sheet rock or lath walls using
anchors. Only install boiler to studs or equiva-
lent wood structure.
5. For applications using solid walls (rock, con-
crete, brick, cinder block etc.), install the wall
bracket using anchors (double expansion shields)
and bolts with washers provided with the boiler.
6. The boiler is too heavy and bulky for a single
person to lift and attempt to mount; a minimum
of 2 people is required for mounting the boiler.
Use extreme care not to drop the boiler or
cause bodily injury while lifting or mounting
the boiler onto the bracket. Once mounted
verify that the boiler is securely attached to
the bracket and wall. Failure to comply with
the above guidelines could result in property
damage, personal injury or death.
PRESTIGE Solo 60/110/175/250 Stud
Walls - Installation
1. Locate the wall studs in the general area of the
boiler placement.
2. Place the wall mounting bracket on the wall,
centering the mounting slots with the stud cen-
ters. Ensure the upper edge of the bracket is
away from the wall.
3. Level the bracket, while maintaining it’s center-
ing with the studs and use a pencil to mark the
location of the mounting slots on the wall.
4. Remove the bracket from the wall and drill 1/4”
diameter hole by 3” deep positioned in the cen-
ter of each mark. For applications using metal
studs and 3/16” toggle bolts drill the required
clearance hole.
5. Reposition the bracket onto the wall and align
mounting slots/holes. Insert the two lag screws
provided (or toggle bolts for metal studs) through
the mounting slots/holes and loosely tighten.
6. Level brack and tighten screws (bolts for metal
studs) securely making sure not to over-tighten
to avoid damaging drywall or plaster.
PRESTIGE Solo 399 & Excellence 110
Stud Walls - Installation
1. To distribute the weight of the boiler evenly
when mounting onto a stud wall it is recom-
mended to use the PRESTIGE Wall Frame Kit.
2. When using the wall frame kit to mount the boil-
er, reference the kit installation instructions and
ensure the frame is securely fastened to the wall.
3. If the structure of wall is questionable, in sup-
porting a minimum weight of 250 pounds (115
kg), it is recommended to use the optional floor
stand in conjunction with the wall frame kit.
Wall Bracket Installation - Solid Walls
1. Locate the general area of the boiler placement.
2. Place the wall mounting bracket on the wall
ensuring the upper edge of the bracket is away
from the wall.
3. Level the bracket and use a pencil to mark the
location of the mounting slots on the wall.
WARNING