Prestige Venting Supplement

3
CHAPTER 1
CHAPTER 1 - PRE-INSTALLATION REQUIREMENTS
• A specific vent adapter is required to transi-
tion from the boiler vent outlet adapter to
specific stainless steel vent system. Contact
the appropriate AL29-4C® vent manufac-
turer for transition adapter information.
• When using stainless steel for the vent sys-
tem, PVC or CPVC pipe meeting the listed
requirements in this manual may be uti-
lized for the combustion air piping.
1.2.4 Polypropylene (PP) Vent Piping and Fittings
Approved polypropylene vent manufacturers and vent
systems:
• Centrotherm Eco Systems, LLC
• Muelink and Grol B.V./Dura Vent
• Z-Flex U.S. Inc.
• ECCO Manufacturing
Only use approved polypropylene components listed
in Table 2 on page 4 to Table 7 on page 8. Ter-
mination must be selected from the options shown in
this manual, using UV-resistant polypropylene.
NOTICE
Contact approved polypropylene vent man-
ufacturer for a copy of their installation in-
structions. Read, understand and follow all
of the vent manufacturer’s instructions be-
fore beginning the installation. Contact vent
manufacturer if you require any technical
support. Failure to properly install and sup-
port vent system can cause the venting sys-
tem to fail, resulting in substantial property
damage, serious injury, or death.
• A specific vent adapter may be required
to transition from the boiler vent outlet
adapter to the specific polypropylene vent
system. Contact the appropriate PP vent
manufacturer for transition adapter infor-
mation.
• When using Polypropylene for the vent sys-
tem, PVC or CPVC pipe meeting the listed
requirements in this manual may be utilized
for the combustion air piping.
WARNING
NOTICE
Table 1
Description
Approved Stainless Steel Vent Adapters and Terminations
SelKirk / Heatfab
Saf-T Vent EZ Seal or
Saf-T Vent SC
M&G/DuraVent
FasNSeal or CVS
Z-Flex U.S. Inc.
Z-Vent
3” Vent Adapter 9301PVC FSA-ULT3 2SVSTTA03
3” Roof & Side Wall Straight Termination 9392 300186 2SVSTPF03
3” Side Wall & 45° Elbow Termination 9311TERM 300130 & 300186 2SVSTEX0345
3” Side Wall Tee Termination 9390TEE 300311 2SVSTTF03
3” to 4” Vent Adapter 9401PVC3 FSA-ULT3* 2SVSTTA04
4” Vent Adapter 9401PVC FSA-ULT4 SVSTTA04.5
4” Roof & Side Wall Straight Termination 9492 300187 2SVSTPF04
4” Side Wall & 45° Elbow Termination 9411TERM 300131 & 300187 2SVSTEX0445
4” Side Wall Tee Termination 9490TEE 300312 2SVSTTF04