Prestige ACVMax Control Supplement

1.0 Operating Information

1.1 Entering Installer Access Code

Installer

Button

The INSTALLER button (the small round button) provides the installing contractor with full access

to all available features after entering an access code.

ENTER INSTALLER

ACCESS CODE

05[4]

Entering installer access code procedure

1. Press the round INSTALLER button.

2. Enter the installer access code “054” by using the LEFT and RIGHT

buttons to select a digit and the UP and DOWN buttons to change the

digit. Press the OK button to enter the access code.

3. The Installer Menu will be displayed after successfully entering the

access code. The Home Screen will be displayed if the access code is

not entered correctly.

Entering the installer access code allows the installer to make adjust-

ments for 30 minutes. After 30 minutes, the access code will need to

be entered again to make any adjustments.

The Installer Menu is divided into four sections:

1. CH & DHW Settings – Allows the installer to adjust the boilers

central / space heating, domestic hot water and boiler settings for the

application. See pages 5 through 35.

2. Manual Operation – The burner and circulators can be manually

enabled for testing. See page 59.

3. Reset All Settings – Resets all CH, DHW, Boiler, and Cascade

Settings back to the factory defaults. See pages 36 through 37.

4. Cascade – Allows the installer to setup, adjust, and monitor the

Cascade System. See pages 38 through 56.

NOTICE

CH & DHW Settings

Fig. 1: ACVMax Navigation Buttons