Full Product Manual

33
8.0 External Wiring
664A0100 - Rev. A
Locate the system temperature sensor
where it can accurately measure the sup-
ply temperature to the heating system.
Inaccurate system temperature readings
could lead to overheating or under heat-
ing resulting in property damage.
1. Connect the system temperature sensor to
the low voltage terminal strip on the wiring
panel below the PRESTIGE control mod-
ule, as shown in Fig. 14 on page 28 & Fig
17 on page 28.
8.12 Modbus Wiring
The ACVMax control includes the ability to
communicate with building management sys-
tems (BMS) through a Modbus interface.
Consult the PRESTIGE ACVMax Control
Supplement for more information.
CAUTION