Instinct User Manual

13
CHAPTER 5
CHAPTER 5 - CTRLMAX OPERATION
5.3. Home Screen
The Home Screen presents status information in a very
user friendly way so that the current state of the boiler
can be quickly accessed.
• Screen backlight - it will illuminate when any soft
key is touched, and remain illuminated for ve min-
utes.
• Screen brightness - it can be adjusted at the
Home screen by touching and holding simulta-
neously the
and soft keys for 2 seconds.
Touch the
and soft key to increase or de-
crease the contrast. Touch
to end the process.
Main Icons of CTRLMax display
• Central Heating - indicates information related
to central/space heating.
•
DHW - indicates information related to Domes-
tic Hot Water.
•
Home - to go back to the home screen.
•
Back - to go back to the previous screen.
•
Warm Weather Shutdown - displays on the
home screen when the outdoor temperature
reaches the Warm Weather Shutdown tempera-
ture.
•
Reset - to reset the system to the factory set-
tings.
•
Settings - to access controller settings (lan-
guage, units, etc.).
•
Easy Setup - to quickly adjust the most com-
mon settings.
•
CH/DHW operation - to enable/disable the
central/space heating or Domestic Hot Water func-
tions
•
Information - to get information on the boiler.
DHW Demand
DHW
186°F
156°F
Target = 186°F
INSTINCT Combi
Radiator icon: indicates that a central heating
call has been received. A small number 1 or 2
indicates which CH calls are active
Faucet icon: indicates that a DHW call has been
received.
Circulator icons: indicate which circulators are currently
powered.
Status line: displays the current operating state of
the boiler.
Basic information: The user can toggle
through items using the
and soft
keys to view Target, Supply, Return, Domestic,
Outdoor, System and Mix Zone temperatures,
DHW ow.
The model is indicated at the top of the screen.
The INSTINCT is represented in the center of the Home Screen. Basic operating infor-
mation such as supply and return temperatures are displayed as well as current burner
status.
A ame symbol is displayed when the unit is red. The
ame size changes to indicate the current ring rate.