CTRLMax Manual
59
CHAPTER 8
CHAPTER 8 - CASCADE
The Cascade System must be configured
after wiring is completed and any required
adjustments are made in Cascade Settings.
The Cascade Autodetection function automatically nds
and congures all boilers in the Cascade System. This elim-
inates the need to manually congure each boiler of the
Cascade System. Select Cascade Autodetection on the
Master boiler then follow the on-screen instructions to per-
form Cascade Autodetection.
Once Cascade Autodetection is nished, a message
will be displayed indicating how many boilers have been
found. If the number of boilers found is correct, press OK to
nish Cascade Autodetection.
If the number of boilers found is not correct, check the cas-
cade communication cables between the boilers and re-
peat Cascade Autodetection process.
Cascade
Cascade Autodetect.
?
Cascade Autodetect.
Press OK button
to begin Cascade Autodetection,
any other button to cancel.
Installer Code
Navigate on the screen using the UP, DOWN, LEFT and RIGHT keys,
then the validate a selection with the OK key. To increase/decrease
values, use the UP and DOWN or LEFT and RIGHT keys, according to
the situation and validate with OK.
NOTICE
CTRLMax_w Instinct_UK version_222171_A01.indd 59 18/07/2019 18:38