User's Manual

Chapter 2—

錯誤

尚未定義樣式。

Redial/Voice Recognition

There is no redial function for Siemens phones. Pressing

this button once will activate communication between the

phone and the Car Kit, the LED will turn on, but there will

be no phone call placed. To turn off the communication

between the Car Kit and your phone, press the “An-

swer/Disconnect” button on the Control Module.

Press and hold for two seconds to activate the Voice

Recognition function. After the tone, repeat your pre-

recorded voice tag: the number automatically dials.

LED indicator light

The LED is only on during calls.

Making a call

Refer to the following to make a call:

1. Press and hold the Answer/Disconnect button until the LED turns on.

2. Dial and send the call from the phone.

3. When the call connects, press the Answer/Disconnect button.

4. Press the Answer/Disconnect button to end the call.

Resetting the Car Kit

When changing phones it is necessary to reset the Car Kit and establish a new

connection. Refer to the following:

1. Press and hold the Volume Down button.

2. With the Volume Down button pressed, press the Answer/Disconnect button.

The Car Kit is now reset.