User's Manual

Chapter 2— 錯誤 ! 尚未定義樣式。
13
Notes on using voice recognition
Voice recognition is a feature of your phone which enables you to dial a number
by simply saying a pre-recorded “voice tag”. Normally when you set a voice tag,
you speak directly into the phone. When accessing this feature with the Car Kit,
you may find it necessary to re-record the voice tag while you are in the car. This
will set not only the way you say the voice tag, but also record a familiar back-
ground noise.
Sony-Ericsson mobile phones only communicate with the Car Kit during a call. It
is not possible to record a voice tag using the supplied microphone: you must use
the microphone on your phone. For best results, record voice tags while you are
inside your car, and hold the phone at arm’s length.
Troubleshooting
My Sony-Ericsson mobile phone can’t make
a connection
q Make sure the bluetooth function on
your phone is enabled.
q Make sure the car ignition is on.
q Reset the Car Kit and try again.
q Turn your Sony-Ericsson mobile phone
off and on again, and try the proceedure
for connection once more.
My phone doesn’t recognize my voice tags
for voice recognition.
qRe-record voice tags using the method
described in “Notes on using Voice
Recognition” above.
qClose your windows while using voice
recognition.
qSpeak clearly in the same manner in
which the voice tag was recorded.