User's Manual

Bluetooth Car Kit user’s manual
8
Notes on using voice recognition
Voice recognition is a feature of your phone which enables you to dial a number
by saying a pre-recorded “voice tag”. Normally when you set a voice tag, you
speak directly into the phone. When accessing this feature with the Car Kit, you
may find it necessary to re-record the voice tag while you are in the car. This will
set not only the way you say the voice tag, but also record a familiar background
noise.
Since Nokia phones are in continual contact with the Car Kit, it is possible to use
the included Car Kit’s microphone to record the voice tag. Locate the feature on
your mobile phone, and when prompted for the voice tag, speak clearly from a
comfortable position in the driver’s seat.
Troubleshooting
My Nokia mobile phone can’t make a
connection
q Make sure the bluetooth function on
your phone is enabled.
q Make sure the car ignition is on.
q Reset the Car Kit and try again.
q Turn your Nokia mobile phone off and
on again, and try the proceedure for
connection once more.
When my Nokia mobile phone is ringing and
I adjust the volume, the call is disconnected.
qWith some Nokia phones, adjusting the
volume before the call is initaited will
disconnect the call. Wait until the call is
answered, then adjust the volume.
My phone doesn’t recognize my voice tags
for voice recognition.
qRe-record voice tags using the Car Kit’s
supplied mircophone while you are in
the car.
qClose your windows while using voice
recognition.
qSpeak clearly in the same manner in
which the voice tag was recorded.