User's Manual

Chapter 2— 錯誤 ! 尚未定義樣式。
5
You only need to re-connect the phone if you manually disconnect it. Refer to the
following to re-connect the phone:
1. Turn on the car ignition, then turn on the phone.
2. Scroll through the Menu and select Bluetooth.
3. Select View paired devices.
4. Select Triamp and press Options.
5. Scroll to Establish Bluetooth connection, and press Select.
Connected to Triamp appears on the screen.
Setting automatic authorization
Automatic authorization enables the phone and Car Kit to communicate without
prompting you each time a connection is made. If this feature is disabled, you are
prompted to enter the passkey every time you get into the car.
Refer to the following to change the setting:
1. Turn on the car ignition, then turn on the phone.
2. Scroll through the Menu and select Bluetooth.
3. Select View paired devices.
4. Select Triamp and press Options.
5. Scroll to Request conn. authorization and press Select.
6. Select No to automatically connect.
Select Yes to manually connect.
Using the control module