Owner manual

2
www.tritronics.com

Intensity levels: 1, 2, 3, 4, 5, 6
Line up the number you select with the light on the top of the housing.
“N” (neutral) or “T” (tone) setting, depending on model.
“A” is for the Beeper and Tracer
®
accessory operation on models other than the Upland.

Battery Life Indicator (“Fuel Gauge”)
When a stimulation button is pressed, this light will be:
• Steady green when the batteries are fully charged.
• Steady amber when the batteries are partly discharged.
• Steady red when the batteries need charging very soon.
• Rapid red ashing means the batteries are completely dead and the transmitter will not operate the collar.
Intensity and Stimulation Indicator
• This light is the position indicator for the selected operational setting or intensity level. It ashes as described
above when a stimulation button is activated

Buttons vary by model. See the “Model Guide” section for detail.
