Owner manual
36
www.tritronics.com
As you cycle through the settings, 1-8, the order will occur as follows:
• Press and hold the Power/Mode Select button until both LED lights ash three (3) times together
then release the button. The Beeper will now operate in the Modes you have selected.
SETTING
POINT Mode
HUNT Mode
Solid (Hawk Scream) 1 blink (1 Beep)
Solid (Hawk Scream) 2 blinks (2 Beeps)
3
Solid (Hawk Scream) 3 blinks (3 Beeps)
Solid (Hawk Scream) No light (No Beep)
5
Blinking (1 Beep) 1 blink (1 Beep)
6
Blinking (1 Beep) 2 blinks (2 Beeps)
Blinking (1 Beep) 3 blinks (3 Beeps)
8
Blinking (1 Beep) No light (No Beep)