User Manual

T R I - T R O N I C S

Using the Stimulation Buttons

USING THE STIMULATION BUTTONS

Tri-Tronics Remote Trainers offer two types of stimulation,

“continuous” and “momentary” (Classic 70 and Trashbreaker

Ultra

offer only continuous stimulation).

Continuous Stimulation

The timing of continuous stimulation is controlled by

the trainer. Continuous stimulation stays on while the

transmitter button is pressed, up to the “time out” period,

described below.

Momentary Stimulation

The timing of momentary stimulation is pre-set. Momentary

stimulation stays on only very briefly, no matter how long the

button is pressed. To produce a second momentary correction,

press the button again. To produce a series of momentary

corrections, press the button for each correction.

Instantly Selectable Intensity

Most Tri-Tronics Remote Trainer models have more than one

stimulation button. This feature allows the trainer to choose

instantly among low, medium, and high stimulation. This

selection feature applies to either continuous or momentary

stimulation, or to both, depending on the model.

Being able to select low, medium, or high stimulation by

touch, using buttons, means that you do not need to look at

the transmitter when you select intensity levels – you can

keep your eyes on the dog at all times. It also means that

intensity changes are instantaneous. These features are an

advantage in many training situations.

Time-out Period

The time-out period is about 9 seconds for all models except

the Beagler

. The time-out period on the Beagler

is about 4

seconds (“extended stimulation”). If the collar times out,

release the button briefly to restore collar function.

Page 16 Remote Trainer