User Manual

FITTING THE COLLAR ON THE DOG
Place the collar strap in the middle of the dog’s neck.
The receiver should be on the underside of his neck.
Place the receiver so the light is facing forward (towards
the dog’s nose).
Tighten the buckle by holding it with two fingers as you
pull the strap snug. Do not put any fingers under the
strap as you tighten it. Make it snug, Remote Trainers
need to be snug to work properly. A loose collar can
cause inconsistent stimulation.
Always slip the
free end of the
collar strap
through the D-ring.
When using the
Beagler
XL
, be sure
to slip the free end
of the strap through
both sides of
the buckle.
T R I - T R O N I C S
Fitting the Collar on the Dog
To tighten the collar on the
dog, hold the buckle as shown
and draw the strap snug.
Remote Trainers need to be
snug for consistent stimulation.
Fitting the Collar on the Dog Page 13