User Manual

TURNING THE REMOTE TRAINER ON AND OFF
The Remote Trainer consists of a hand-held transmitter and
a radio receiver on the dog’s collar. The collar must be turned
on before it can receive signals from the transmitter. Between
training sessions, you should turn the collar off to save
battery life.
To turn the Remote Trainer collar on, set the transmitter
intensity knob to the number 0 (zero). Hold the transmitter
close to the collar (any distance between 2 and 10 feet). Hold
down any transmitter button as you watch the light on the
front of the receiver. When the light begins flashing red, the
collar is turned on and capable of receiving signals from the
transmitter. This process takes about 5 seconds.
Note that it takes about 20 seconds after turn-on before
the collar can apply stimulation.
T R I - T R O N I C S
Turning the Remote Trainer On and Off
When the intensity knob is on
zero, pressing any transmitter
button turns the collar on or off.
Move the knob to a number
other than zero for training.
When the collar light blinks
red, the collar is turned on.
Turning the Remote Trainer On and Off Page 11