Installation & Assembly

Step 1: Set the Double ate Posts

opening.

B. Set posts into post holes. Hole Dimensions for standard gate

openings are 30” deep by 12” wide. However consult local con-

depth.

C. The opening (measuring from the inside face of one post to in-

side face of the other post) for a standard size Trex Seclusions

ate panel should be 91 1/2” wide**. The Inside faces of posts

should be parallel with each other. (**The opening for a double

gate using standard Large Size Trex te panels is

130 1/2” wide) Custom heights and

widths are available.

Note: Due to concrete cure

-3

days before gate is installed.

*Note: If the Hinge Post is not

connected to a fence panel or if

a large gate panel is used it may

be necessary to use a Heavy

Fence Distributors

