Installation & Assembly
Step 1: Set the Single ate Posts
A.
faces away from gate opening.
B. Set posts into post holes. Hole Dimensions for standard
gate openings are 30” deep by 12” wide. However con-
C. The opening (measuring from the inside face of one post
to inside face of the other post) for a standard size Trex
Seclusionste panel should be 46 1/4”. Inside faces of
posts should be parallel with each other. (**The opening
for a standard
Large Size Trex ate panel is 65 3/4” wide)
Custom heights and widths are available.
Note: Due to concrete cure
-3
days before gate is installed.
*Note: If the Hinge Post is not
connected to a fence panel or if
a large gate panel is used it may
be necessary to use a Heavy
*
16
Fence Distributors