Installation Guide

110
TREX
®
SIGNATURE™ RAILING
Attaching Upper Stair Rails
16. Working from one end
of upper stair rail, snap
balusters into upper stair
rail working down length
of rail.
17. Attach top stair rail
to top stair bracket
(all types) using two
self-tapping screws
(provided) on each side
of stair bracket.
NOTE: Pre-drilling is
required (7/64" [0.28 cm]
drill bit) for attachment of
stair railing to stair bracket.
Attachment of Stair Bracket Covers, Skirts, and Caps
18. Attach corresponding
bracket covers over
opening in upper and
bottom rails.
19. Attach provided post
skirt to bottom of
posts when using Trex
®
Signature™ posts.
20. Attach post caps to Trex
®
Signature™ posts
(use of rubber mallet may be required for secure
attachment).
21. Attach post caps to post sleeves using external
grade PVC construction adhesive.
20
Trex
Signature™
post
®
2
21
Post
sleeve
3
1
17
1
2
18
1
19
Trex
Signature™
post
®
2
16
ATTACHING FIXED STAIR BRACKETS AND RAILS TO TREX
®
SIGNATURE™ POSTS AND PRESSURE-TREATED POST AND POST
SLEEVES/
CONTINUED
TREX
®
SIGNATURE™
NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.