Installation Guide

100
TREX
®
SIGNATURE™ RAILING
11. Place 2" x 4" (51 mm
x 102 mm) on Trex
®
Signature™ top rail.
12. Secure 2" x 4" (51 mm
x 102 mm) to top rail
using Trex® Signature™
Cocktail Bracket (sold
separately). Ensure that
there is a bracket at
each end of the railing
section, then space
brackets approximately
every 24" and attach
with 4 screws provided.
NOTE: Pre-drilling before attachment is recommended.
13. Pre-drill and toenail
2-1/2" (6.4 cm)
approved deck screw
at each end of 2" x 4"
(5.1 cm x 10.2 cm) into
post on back side of
rail (side not facing
decking).
14.
Attachment of Bottom Rail Bracket Covers
and Caps
See instructions on page 90.
15.
Attachment of Foot Block
See instructions on page 104.
1
1
11
1
12
2
13
HOW TO INSTALL TREX
®
SIGNATURE™ TRADITIONAL RAILING/CONTINUED
TREX
®
SIGNATURE™
NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.