Installation Guide
121
TREX
®
SIGNATURE™ RAILING
11. Place 2" x 4" (51 mm x
102 mm) on Trex
®
Signature™ top stair rail.
12. Secure 2" x 4" (51 mm
x 102 mm) to top rail
using Trex
®
Signature™
Cocktail Bracket (sold
separately). Ensure that
there is a bracket at each
end of the railing section,
then space brackets
approximately every 24"
and attach with 4 screws
provided.
NOTE: Pre-drilling before attachment is recommended.
13. Pre-drill a pilot hole and
toenail 2-1/2" (6.4 cm)
screw at each end of
2" x 4" (5.1 cm x 10.2 cm)
into post on back side
of rail (side not facing
decking).
Attachment of Lower Stair Bracket Covers, Skirts,
and Caps
14a. See instructions on page 110 for fixed stair brackets
or page 118 for swivel stair brackets.
NOTE: Top Bracket Covers are not attached in this
configuration
.
HOW TO INSTALL TREX
®
SIGNATURE™ TRADITIONAL STAIR RAILING
TREX
®
SIGNATURE™/CONTINUED
11
1
12
2
13