Installation Guide

114
TREX
®
SIGNATURE™ RAILING
Attachment of Stair Bracket Covers, Skirts, and Caps
18. Attach corresponding bracket covers over opening
in upper and bottom rails.
19. Attach provided post skirt to bottom of posts when
using Trex
®
Signature™ posts.
20. Attach post caps to Trex
®
Signature™ posts
(use of rubber mallet may be required for secure
attachment).
21. Attach post caps to post sleeves using external
grade PVC construction adhesive.
20
Trex
Signature™
post
®
2
21
Post
sleeve
3
1
3
1
18
4
2
1
19
Trex
Signature™
post
®
2
ATTACHING CROSSOVER SWIVEL BRACKET ON SIGNATURE POST
TREX® SIGNATURE™
ATTACHING STAIR SWIVEL/COMPOUND SWIVEL BRACKETS AND
RAILS TO TREX
®
SIGNATURE™ POSTS AND PRESSURE-TREATED POST
AND POST SLEEVES/
CONTINUED
TREX
®
SIGNATURE™
1. Follow previous instructions for installation of lower
stair rail into either fixed or swivel brackets.
2. Place two balusters into
lower stair rail at each
end of post.
3.
Position top stair rail onto balusters ensuring
balusters are fully seated in top rail (position to side
of post) and ENSURE that balusters are parallel with
post.
4.
Follow previous instructions marking and installation
of either fixed or swivel bracket where this is required.
Attaching Stair Crossover Swivel Bracket to Post
5. Insert stair crossover swivel bracket into post.
NOTE: Keep the bracket cover on when inserting this
into post, this will cover the screw attachment area.
2
3
Bracket
cover
5
NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.