Installation Guide

121

TREX

SIGNATURE™ RAILING

11. Place 2" x 4" (51 mm x

102 mm) on Trex

Signature™ top stair rail.

12. Secure 2" x 4" (51 mm

x 102 mm) to top rail

using Trex

Signature™

Cocktail Bracket (sold

separately). Ensure that

there is a bracket at each

end of the railing section,

then space brackets

approximately every 24"

and attach with 4 screws

provided.

NOTE: Pre-drilling before attachment is recommended.

13. Pre-drill a pilot hole and

toenail 2-1/2" (6.4 cm)

screw at each end of

2" x 4" (5.1 cm x 10.2 cm)

into post on back side

of rail (side not facing

decking).

Attachment of Lower Stair Bracket Covers, Skirts,

and Caps

14a. See instructions on page 110 for ﬁxed stair brackets

or page 118 for swivel stair brackets.

NOTE: Top Bracket Covers are not attached in this

conﬁguration

HOW TO INSTALL TREX

SIGNATURE™ TRADITIONAL STAIR RAILING

TREX

SIGNATURE™/CONTINUED