Installation Guide

101
TREX
®
SIGNATURE™ RAILING
INSTALLATION OF HORIZONTAL SWIVEL BRACKETS
TREX
®
SIGNATURE™ STANDARD
Attach Swivel Brackets Base Using Trex
®
Signature™ Posts
TIP: Use a clamp to help hold brackets in place
while fastening with screws.
1. Measure 1-3/8"
(3.5 cm) from top of
post base plate or
1-7/8" (4.8 cm) from
decking surface.
Mark with light line.
2. Center lower bracket on post above the marked
line and attach using four self-tapping screws
(provided).
3. Measure up 32-5/16" (82.0 cm) for 36" (91.4 cm)
tall railing or 38-5/16" (97.3 cm) for 42"
(106.7 cm) tall railing from top of lower rail
bracket. Mark with a light line.
4. Center upper
bracket on post
below marked line
and attach using
four self-tapping
screws (provided).
NOTE: Upper bracket
is not required on
crossover post
configuration.
Attach Swivel Brackets Using Pressure-treated
Posts and Post Sleeves
TIP: Use a clamp to help hold brackets in place
while fastening with screws
1. Measure 1-7/8" (4.8 cm) up from deck surface
to bottom of bracket. Slide skirt up to allow for
proper measurement, then push skirt back down
onto surface of decking BEFORE ATTACHING
BRACKET. Mark with light line.
2. Center lower bracket on post above the marked
line and attach using four 2" (5.1 cm) wood
screws (provided).
3. Measure up 32-5/16" (82.0 cm) for 36" (91.4 cm)
tall railing or 38-5/16" (97.3 cm) for 42"
(106.7 cm) tall railing from top of lower rail
bracket. Mark with a light line.
4. Center upper bracket on post below marked line
and attach using four 2" (5.1 cm) wood screws
(provided).
1-3/8"
(3.5 cm)
1-3/8"
(3.5 cm)
2-1/2"
Post
2-1/2"
Post
1
1
4
2
32-5/16"
(82.0 cm)
or
38-5/16"
(97.3 cm)
32-5/16"
(82.0 cm)
or
38-5/16"
(97.3 cm)
3
1
2
2
1-7/8"
(4.8 cm)
1-7/8"
(4.8 cm)
1
1
2
2
32-5/16"
(82.0 cm)
or
38-5/16"
(97.3 cm)
32-5/16"
(82.0 cm)
or
38-5/16"
(97.3 cm)
3
1
4
2