User Manual

ManualsBrandsTREX ManualsLighting & Ceiling Fans30-watt Low Voltage DC Transformer, LED, 25DLTRANSFORMER

100

TRex 87 / 113

Installing driver source [Done]

Compiling the driver [Done]

Installing driver [Done]

Compiling the netdev driver [Done]

Installing netdev driver [Done]

Installing libraries [Done]

Installing header files [Done]

Installing binaries [Done]

Installing config files [Done]

Installing examples [Done]

Installing documentation [Done]

Checking dynamic linker bindings:

Regenerate dynamic linker bindings [Done]

Installing symbolic links [Done]

######################################################################

# Installation completed successfully #

# See /tmp/nt_driver_3gd.log for a full install log #

######################################################################

[ Extract and install the Image control applications ]

imgctrl

[ Install Images ]

[ Package installation done... ]

[bash]>

7.7.1.2 Update the ﬁrmware

[bash]>cd /opt/napatech3/images/

[bash]>tar xf NT200A01-2x100_fpga_200-9508-07-06.tar.gz

[bash]>/opt/napatech3/bin/imgctl -p --ini trex --ntimg 200-9508-07-06.ntimg

imgctrl v3.5.1.29628 (May 11 2017 15:28:19) (Logfile: /tmp/imgctrl.log)

Scanning for Napatech adapters..

Adapter upgrade commencing..

Writing FPGA bank 1

Erasing................... 100% done

Writing................... 100% done

Verifying................. 100% done

Done writing FPGA bank 1

Note: You can inspect the upload result through the Bank1 Contents

section using the --query mode. To try the new image, remember

to switch bank using the --switch mode. See --help for more information.

Upgrade process complete

[bash]>/opt/napatech3/bin/imgctl -s

imgctrl v3.5.1.29628 (May 11 2017 15:28:19) (Logfile: /tmp/imgctrl.log)

Scanning for Napatech adapters..

Switching image on adapter 0:

OK. Image switched. Remember to issue --confirm or --discard to accept/discard the ←-

change. Inquire the adapter via --query

[bash]>/opt/napatech3/bin/imgctl -s --confirm

imgctrl v3.5.1.29628 (May 11 2017 15:28:19) (Logfile: /tmp/imgctrl.log)

Scanning for Napatech adapters..

Applying current running image as safeboot image..

OK. Adapter PrimaryImage has been updated to reflect current running image.

[bash]>

7.7.1.3 Create a driver conﬁguration ﬁle

[bash]>/opt/napatech3/bin/ntstart.sh