User Manual

TRex 78 / 113
Expected-PPS : 539.85 Kpps
Expected-CPS : 8.29 Kcps
Expected-BPS : 2.90 Gbps
Active-flows : 7860 Clients : 255 Socket-util : 0.0489 %
Open-flows : 3481234 Servers : 5375 Socket : 7860 Socket/Clients : 30.8
drop-rate : 0.00 bps #
v
4
current time : 425.1 sec
test duration : 574.9 sec
-Latency stats enabled
Cpu Utilization : 0.3 %
if| tx_ok , rx_ok , rx ,error, average , max , Jitter , max window
| , , check, , latency(usec),latency (usec) ,(usec) ,
------------------------------------------------------------------------------------------------------- ←-
0 | 420510, 420495, 0, 1, 58 , 1555, 14 | 240 257 ←-
258 258 219
1 | 420496, 420509, 0, 1, 51 , 1551, 13 | 234 253 ←-
257 258 214
v
1
,
v
2
,
v
3
,
v
4
These counters should be zero
7.4 Fedora 21 Server installation
Download the .iso file from link above, boot with it using Hypervisor or CIMC console.
Troubleshooting → install in basic graphics mode
• In packages selection, choose:
– C Development Tools and Libraries
– Development Tools
– System Tools
• Set Ethernet configuration if needed
• Use default hard-drive partitions, reclaim space if needed
• After installation, edit file /etc/selinux/config
set:
SELINUX=disabled
• Run:
systemctl disable firewalld
• Edit file /etc/yum.repos.d/fedora-updates.repo
set everywhere:
enabled=0
• Reboot