User Manual

ManualsBrandsTREX ManualsLighting & Ceiling Fans30-watt Low Voltage DC Transformer, LED, 25DLTRANSFORMER

101

102

103

104

105

106

107

108

109

110

TRex 101 / 113

Address: fee00138 Data: 0000

Masking: 00000002 Pending: 00000000

Capabilities: [90] Express (v2) Root Port (Slot-), MSI 00

DevCap: MaxPayload 256 bytes, PhantFunc 0

ExtTag- RBE+

DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+

RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-

MaxPayload 256 bytes, MaxReadReq 128 bytes

DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

LnkCap: Port #7, Speed 8GT/s, Width x16, ASPM L1, Exit Latency L0s <512ns, ←-

L1 <16us

ClockPM- Surprise+ LLActRep+ BwNot+

LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+

ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 8GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ←-

ABWMgmt-

RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-

RootCap: CRSVisible-

RootSta: PME ReqID 0000, PMEStatus- PMEPending-

DevCap2: Completion Timeout: Range BCD, TimeoutDis+, LTR-, OBFF Not ←-

Supported ARIFwd+

DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ←-

ARIFwd+

LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-

Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ←-

ComplianceSOS-

Compliance De-emphasis: -6dB

LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, ←-

EqualizationPhase1+

EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-

Capabilities: [e0] Power Management version 3

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [100 v1] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>

Capabilities: [110 v1] Access Control Services

ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- ←-

DirectTrans-

ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- ←-

DirectTrans-

Capabilities: [148 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ←-

ECRC- UnsupReq- ACSViol-

UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ←-

ECRC- UnsupReq- ACSViol-

UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ←-

ECRC- UnsupReq- ACSViol-

CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-

AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-

Capabilities: [1d0 v1] Vendor Specific Information: ID=0003 Rev=1 Len=00a <?>

Capabilities: [250 v1] #19

Capabilities: [280 v1] Vendor Specific Information: ID=0005 Rev=3 Len=018 <?>

Capabilities: [300 v1] Vendor Specific Information: ID=0008 Rev=0 Len=038 <?>

Kernel driver in use: pcieport

look for the PCI id

run the lspci -vv to ﬁnd out the Part number

Part number should be MCX516A-CDAT(CX5)/MCX416A-CCAT (CX4) for 100Gb NICS

PCI LnkSta (status) should be x16 and NOT x8 in case it is not you should look for UCS PCIe conﬁgucation (raiser)