User Manual

TRex 94 / 113
Preparing to unpack .../mlnx-fw-updater_3.4-1.0.0.0_amd64.deb ...
Unpacking mlnx-fw-updater (3.4-1.0.0.0) ...
Setting up mlnx-fw-updater (3.4-1.0.0.0) ...
Added RUN_FW_UPDATER_ONBOOT=no to /etc/infiniband/openib.conf
Attempting to perform Firmware update...
Querying Mellanox devices firmware ...
Device #1:
Device Type: ConnectX4
Part Number: MCX416A-CCA_Ax
Description: ConnectX-4 EN network interface card; 100GbE dual-port QSFP28; PCIe3.0 ←-
x16; ROHS R6
PSID: MT_2150110033
PCI Device Name: 03:00.0
Base GUID: 248a07030014fc60
Base MAC: 0000248a0714fc60
Versions: Current Available
FW 12.16.1006 12.17.1010
PXE 3.4.0812 3.4.0903
Status: Update required
Found 1 device(s) requiring firmware update...
Device #1: Updating FW ... Done
Restart needed for updates to take effect.
Log File: /tmp/MLNX_OFED_LINUX.16084.logs/fw_update.log
Please reboot your system for the changes to take effect.
Device (03:00.0):
03:00.0 Ethernet controller: Mellanox Technologies MT27620 Family
Link Width: x16
PCI Link Speed: 8GT/s
Device (03:00.1):
03:00.1 Ethernet controller: Mellanox Technologies MT27620 Family
Link Width: x16
PCI Link Speed: 8GT/s
Installation passed successfully
To load the new driver, run:
/etc/init.d/openibd restart
Reboot
[bash]>sudo reboot
After reboot
[bash]>ibv_devinfo
hca_id: mlx5_1
transport: InfiniBand (0)
fw_ver: 12.17.1010 << 12.17.00
node_guid: 248a:0703:0014:fc61
sys_image_guid: 248a:0703:0014:fc60
vendor_id: 0x02c9
vendor_part_id: 4115
hw_ver: 0x0