Installation Guide

10
ATTACH A STANDARD GUTTER SYSTEM (NOT
INCLUDED) TO COLLECT THE WATER FROM THE
TREX RAINESCAPE DOWNSPOUTS
FRONT VIEW
CUT A TAB ON THE TOP OF
THE GUTTER AND FOLD OVER
ATTACH TO THE BOTTOM
OF THE JOIST
ATTACH A PIECE
OF L-METAL TO
THE GUTTER, THEN
TO THE BOTTOM
OF THE JOIST
ATTACHING THE GUTTERS
8. INSTALLING A GUTTER SYSTEM
(not included)
»
Before installing a gutter system perform a water test
to clean out the system and check for any leaks.
»
Attach a standard gutter system to collect the
water from the Trex RainEscape downspouts.
DOWNSPOUT SHOULD
EXTEND ABOUT 1"
INTO THE GUTTER
WE SUGGEST INSTALLING A 2x4 or 2x6 ACCESS PANEL TO CHECK GUTTER
WITHOUT REMOVING SOFFIT
SIDE VIEW
NOTE: Installing a clean-out trim piece will allow access to
gutter line after installation.
8A
7
8B
8D
8C
FOR 2x12 JOIST
EXTEND THE
DOWNSPOUT USING
A STANDARD
GUTTER DOWNSPOUT
AND TRIMMED
TO LENGTH
FOR 2x6 OR 2x8
JOIST, DOWNSPOUT
NOZZLE CAN BE CUT
TO LENGTH
SCREW GUTTER
TO DOWNSPOUT
DECKING
TROUGH
TAPE
FASCIA
SOFFIT
SOFFIT
7. INSTALLATION OF FASCIA
»
Deck board go over fascia. (7)
2x4 ACCESS
PANEL
BASIC INSTALLATION
BUTYL
CAULK
BUTYL
CAULK
6C
PUSH AGAINST HOUSE
(TAPE WILL COMPRESS)
BASIC INSTALLATION