Installation Guide

pins so that stakes will not be disturbed when digging holes and approx.
4-5 inches inside of property pins to insure not to encroach on neighbors
property (See Fig.1).
2.
string every 97” on center. Ideal spacing between posts is 92”. If
2” in
from the string to mark the center of the hole (see Fig. 1).
Step 2: Stake and String
Fig. 1
Step 3: Dig Holes
1. Dig the holes for the posts making sure not to disturb the stakes for the string.
be approximately 12” diameter and 30” 
should be dug so they allow equal amounts of concrete on all sides of posts (see g. 2).
Fence Distributors
6
TM
