Installation Guide
1.
11/16” wrench.
2.
3.
4. Due to weather and temperature changes periodic hinge adjustment may be necessary to as-
1. 36” from the ground (or to de-
sired height) using the supplied 1 1/2” self-drilling screws. The latch should be ori-
ented so the catch is on the gate-swing side of the post. The catch will face up or
2. Using the supplied 1 1/2” self-
to the gate pane lining the strik-
er rod up with the catch on the
post latch.
3.
gate panel upright using the sup-
plied 1” self-drilling screws. Han-
3/4”
from the edge of the gate panel.
The height must be staggered.
Step 4: Make any Final Adjustments
T
18
Fence Distributors