Installation Guide

9
Fence Distributors
9
TM

4.

pos and subtract this from the height of the rail on the rst post. Add this
measurement to 3 3/4” and this will be the placement of the downhill bracket
(see Fig. 6).
8 5/8”

1. etween
(see Fig. 7). Touch up the cut end using a zinc rich primer and a matching top
coat to help prevent rust.
Fig 6
5.
5: Cut Horizontal Rails
Be sure to cut only one end of the rails
79 3/8”
-74 1/2”
5 1/8”
+3 3/4”
8 5/8”
Fig 7

to cut the horizontal rails for length. Measure between the posts and cut