Installation Guide

Step 1: Set the Double ate Posts
A.
opening.
B. Set posts into post holes. Hole Dimensions for standard gate
openings are 30” deep by 12” wide. However consult local con-
depth.
C. The opening (measuring from the inside face of one post to in-
side face of the other post) for a standard size Trex Seclusions
ate panel should be 91 1/2” wide**. The Inside faces of posts
should be parallel with each other. (**The opening for a double
gate using standard Large Size Trex te panels is
130 1/2” wide) Custom heights and
widths are available.
Note: Due to concrete cure
-3
days before gate is installed.
*Note: If the Hinge Post is not
connected to a fence panel or if
a large gate panel is used it may
be necessary to use a Heavy
.
*
20
Fence Distributors
