User guide

２６
3.1 Wi-Fi
Wi-Fi can only be used when it connects with home Wi-Fi Access Point (AP) or a free unsecured Wi-Fi hotpot.
Under “Wireless & networs”, tap “Wi-Fi settings”. Ensure that both Wi-Fi and Network Notification are enabled
with green check marks. After a moment, your Wi-Fi networks list should populate. If you need to rescan for
available networks, tap
, then tap Scan. For the secured one, you need to input password or some other form
of access agreement acknowledgement via a browser.
3.1.1 Turn on Wi-Fi
Within the App Panel, tap “Settings” → then 'Wireless & networks' → “Wi-Fi” to turn on and scan. Your MID lists
the networks it finds within range. Tap a network to connect. If necessary, enter Network SSID, Security, and
Wireless password, and tap “Connect”. When your MID is connected to the network, the wireless indicator
appears in the status bar.
3.1.2 Turn off Wi-Fi
To turn off Wi-Fi, tap “Wi-Fi” under “Wireless & networks”.
3.1.3 Add Wi-Fi network
Users may also add a Wi-Fi network under “Wi-Fi settings”.
In “Wi-Fi settings”, tap “Add Wi-Fi network” and then input the network SSID and password.
3.2 Bluetooth
In Effective areas, the device can use Bluetooth to transmit files between the device and other equipments.
3.2.1 Make device discoverable. Under “Settings”, tap “Wirless & networks” → “Bluetooth settings”. Tap
Bluetooth to turn on Bluetooth power and tap “Discoverable”. The Bluetooth indicator
then appears in the
status bar.
3.2.2 Scan for devices. After scanning, there will be a list of available devices.
3.2.3 Pair with the device. Tap the name of an available device to pair with. In the popup “Bluetooth