Datasheet

TREST0N
®
9
TP 715*/
TPH 715*
TP 715*/
TPH 715*
TP 707KK/
TPH 707KK
1. Line extension TP - L
Each standard TP-workbench may also be supplied as a line extension. Fitted to
side of main bench. Stock sizes are shown.
2. Angle extension TP -K
Each standard TP-workbench may also be supplied as an angle extension. Fitted
to front angle of main bench. Stock sizes are shown.
3. Corner workbench TP KK
A corner workbench can be used with two TP/TP-K benches (with one H-frame
pair) to create a 90 deg. angle setup. This unit consists of a worktop, two side
frames and a leg in the middle. Load capacity 150 kg u.d.l. Front side 565 mm.
4. Corner workbench TPH KK
A corner workbench can be used with two TPH benches (with one H-frame pair)
to create a 90 deg. angle setup. This unit consists of a worktop and all necessary
components. Load capacity 150 kg u.d.l. Front side 565 mm.
No. Code Worktop mm Load capacity*
1 TP 710 L 700 x 1000 150 kg
TP 712L 700 x 1200 150 kg
TP 715L 700 x 1500 150 kg
TP 718L 700 x 1800 150 kg
TP 915L 900 x 1500 150 kg
TP 918L 900 x 1800 150 kg
2 TP 510K 500 x 1000 150 kg
TP 712K 700 x 1200 150 kg
3 TP 707 KK 1100 x 1100 150 kg
TP 909 KK 1300 x 1300 150 kg
4 TPH 707 KK 1100 x 1100 150 kg
TPH 909 KK 1300 x 1300 150 kg
Line and angle extension TP-L/TP-K/TP-KK
*) Workbench with one H-frame pair **)Load capacity 150 kg u.d.l.
TP 715
TP 715L
TP 715
TP 510K
TP 715* TP 715*
TP 707 KK
TPH 715* TPH 715*
TPH 707 KK
565 mm
1
2
3
4