Datasheet

88
workbenches TP/TPH/SAP
2
3
4
1
Designed for use in today’s production and
assembly environments, this definitive modular
system, developed over more than 35 years,
provides a high quality working environment.
Customise your workstation to your own
requirements.
1. Workbench TP
Height adjustment with allen-key between
650...900 mm. Frames are of epoxy powder
coated steel in grey RAL 7045. The worktops
are of 25 mm laminated particle board.
2. Workbench TPH
Height adjustment with allen-key between
650...900 mm. Workbench with upright
profiles and a laminate shelf, height adjustment
between 1080...1550 mm, load capacity 50 kg.
Construction as TP. There are a large range of
workbench accessories available, see page 11.
3. Moveable bench SAP
Construction as TP. Height adjustment with allen
key between 650..900 mm. Swivel castors
Ø 100 mm of which two are braked. Load
capacity 150 kg. Lower shelf and push handle
available separately.
4. Lower shelf AT
For moveable bench.
5. Handle PUSH
For moveable bench.
No. Code Worktop
mm
Shelf
mm
Load capacity
static u.d.l.
1 TP 507 500 x 700 150 kg
TP 510 500 x 1000 150 kg
TP 515 500 x 1500 150 kg
TP 710 700 x 1000 300 kg
TP 712 700 x 1200 300 kg
TP 715 700 x 1500 300 kg
TP 718 700 x 1800 300 kg
TP 915 900 x 1500 300 kg
TP 918 900 x 1800 300 kg
2 TPH 712 700 x 1200 310 x 1200 300 kg
TPH 715 700 x 1500 310 x 1500 300 kg
TPH 718 700 x 1800 310 x 1800 300 kg
TPH 915 900 x 1500 310 x 1500 300 kg
TPH 918 900 x 1800 310 x 1800 300 kg
3 SAP 507 500 x 700 150 kg
SAP 710 700 x 1000 150 kg
SAP 715 700 x 1500 150 kg
4 AT 507 500 x 700 40 kg
AT 710 700 x 1000 40 kg
5 PUSH 50 depth 500
PUSH 70 depth 700
5
Stepless height adjustement with allen-key
between 650...900 mm
There is a large range of workbench
accessories available, see page 11.