SDS

TRESEMME GEL CLEAN HOLD
Page:6/13
Version:
1.0
Date of issue/Date of revision:
07.31.2015
Date of previous issue:
00.00.0000
product.
Respiratory protection :
Use a properly fitted, air-purifying or air-fed respirator complying
with an approved standard if a risk assessment indicates this is
necessary. Respirator selection must be based on known or anticipated
exposure levels, the hazards of the product and the safe working limits
of the selected respirator.
Section 9. Physical and chemical properties
Appearance
Physical state :
liquid
Colour :
colourless
Odour :
perfumed
Odour threshold :
Not available.
pH :
7
Melting point :
Not applicable
Boiling point :
Not available.
Flash point :
> 93 °C (199.40 °F)
Evaporation rate :
Not available.
Flammability (solid, gas) :
Not available.
Lower and upper explosive
(flammable) limits
:
Lower: Not available.
Upper: Not available.
Vapour density :
Not available.
Relative density :
Not available.
Solubility :
Not available.
Solubility in water :
Not available.
Partition coefficient: n-
octanol/water
:
Not available.
Auto-ignition temperature :
Not available.
Decomposition temperature :
Not available.
Viscosity :
Dynamic: 55,000 mPa.s
Kinematic: Not available.
Section 10. Stability and reactivity
Reactivity :
No specific test data related to reactivity available for this product or
its ingredients.
Chemical stability :
The product is stable.
Possibility of hazardous reactions :
Under normal conditions of storage and use, hazardous reactions will
not occur.
Conditions to avoid :
No specific data.
Incompatible materials :
No specific data.
Hazardous decomposition
products
:
Under normal conditions of storage and use, hazardous decomposition
products should not be produced. Under normal conditions of storage
and use, hazardous decomposition products should not be produced.