Desk
Ok, let’s get rolling This should be easy, just follow our instructions and you will be back to Netflix in no time.
What’s included cont.
The goods 1 5 6 4 2 3 11 7 9 15 20 8 10 15 17 19 14 16 12 14 4 18 13
What’s included Code Description Qty A M6x10MM Bolt 12 B M6x25MM Bolt 3 C Handle 2 D M3x14MM Screw 4 E Allen Key 1 F M3.
The goods A B C D E F G H I J K L CL DL DR CR IMPORTANT: 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools.
Step 1 Grab Parts 7, 8, 9, 10 and let’s get started with the base of the desk! 75% To save you from a future headache, please only tighten the frame 75%.
Step 2 Attach the Right Side Frame (11) to what you completed in Step 1. You’re killin’ it. 75% Hey, it’s me again, with a friendly reminder to only tighten the frame 75%.
Step 3 Time to assemble the snack drawer! I mean, drawer. Secure Part 19 to Parts 14 and 15. I 15 19 I 14 Slide the bottom panel in.
Step 3 cont. Secure the front of the drawer (12). 15 H G 14 H G 12 Attach the handle.
Step 4 Complete the drawer by attaching the drawer slides. F K DR F F K DL F F K DR F Tip from a friend to a friend: Pay special attention to the markings on theI drawer slides! DR represents the right side of the drawer, while DL marks the left side of the drawer.
Step 5 Let’s get started on the right drawer. You’re basically a professional by now.
Step 5 cont.
Step 6 No this isn’t Deja-Vu! Complete the right drawer by attaching the drawer slides. F F K DR K DL F F F K DR F In case you forgot (we know a lot can happen between Step 4 and Step 6): DR represents the right side of the drawer, while DL marks the left side of the drawer.
Step 7 BACK You’re doing great. Complete the drawer slides by attaching them to the Left, Middle, and Right Side Panels. FRONT 3 5 BACK 4 FRONT BACK 4 FRONT 15 Again, pay special attention to the markings on the drawer slides! CR means the right side of the cabinet; and CL means the left side of the cabinet.
Step 8 Believe it or not, only three more steps after this one. Take the Left Side Panel (3) and Right Side Panel (5) and secure it to the Back Panel (6). 3 G H 6 H G 5 Insert Wooden Dowels (J) into Parts (3), (4), (5), and (6).
Step 9 How much wood would a woodchuck chuck? I apologize...
Step 10 B L 2 L B B L L B L L L L 100% L The moment we’ve all been waiting for... Once all the connections between the metal frame and table top are lined up, tighten everything to 100%.
Step 11 Insert the drawers and adjust the footpads to level the desk. 13 12 Friendly tip: Rotating the adjustable footpads on the bottom of each leg will help level the desk & prevent wobbling. Ta-da! Chip and Joanna Gaines would be so proud.
Safety first, fun later We want your Desk to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws and bolts every 2 months. Safe use of this product starts with you. Use this desk responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use.
We are only in business if you’re happy We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen - as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.
